Prioritize A Channel In A Scan List; Set Priority Channels - Motorola CP160 User Manual

PRIORITIZE A CHANNEL IN A SCAN
LIST
You may want to check the activity on one or two
channels more frequently than others. You can do
this by prioritizing them:
Priority Channel Scanning Sequence
None specified Ch1 Ch2 Ch3
Ch4 ...Ch1
Channel 2 Ch2 Ch1 Ch2 Ch3
(Priority 1)
Ch2 Ch4 Ch2 ...Ch1
Channel 2 Ch2 Ch1 Ch8 Ch3
(Priority 1) and
Ch2 Ch4 Ch8 ...Ch1
Channel 8
(Priority 2)
Note: If you are receiving on a non-priority channel
and traffic becomes active on a priority
channel, your radio will automatically switch
to that priority channel and indicate the
activity with a short tone.

Set Priority Channels

Note: You cannot assign the same priority to two
different channels.
J
1 to enter menu mode.
L M
PROG LST
2 or until
J
PROG LST
3 to select
L M
SCAN LST
4 or until
J
SCAN LST
5 to select
L M
EDIT PRI
6 or until
J
EDIT PRI
7 to select
L M
PRI #1
or
8 until
PRI #2
– or – until
J
9 to select the desired priority level.
You see the current priority channel.
English
31