Setting The Unit; Power Indicator - Pioneer GM-7300M Owner's Manual

Setting the Unit ENGLISH
lPF (low-Pass-Filter) Cut Off
Frequency Control
You can select a cut off frequency
from 40 Hz to 240 Hz.
BFC (Beat Frequency Control)
Switch
Gain Control
If the sound level is too low, even
when the volume of the car stereo
used along with this power
amplifier is turned up, turn gain
control on the front of the power
amplifier clockwise. If the sound
distorts when the volume is turned
up, turn the gain control counter-
clockwise.
• When using with an RCA equipped
car stereo (standard output of 500
mY), set to the NORMAL position.
When using with an RCA equipped
Pioneer car stereo with max. output of
4 Y or more, adjust level to match the
car stereo output level.
• If you hear too much noise when
using the speaker input terminals, tum
the gain control counter-clockwise.
Bass Boost Control Switch
You can select a bass boost level
from 0 dB, 6 dB and 12 dB.
If you hear a beat while
listening to an AM broadcast
with your car stereo, change
the BFC switch using a small
standard tip screwdriver.
Power Indicator
The power indicator lights when the
power is switched on.