Table of Contents
Advertisement
Menu Operation
Motion Detection Setting
The motion detection detects the moving objects in the
scene by monitoring changes in brightness level. You can
select the level of sensitivity for motion detection to 8 zone.
1.
Select [MOTION DET] option.
2.
Use [LEFT] or [RIGHT] button to select a [ON] and press
[SET]. The [MOTION DETECTION] menu appears.
3.
Select [AREA SETUP] option.
•
Use [LEFT] or [RIGHT] button to select a area on
the [AREA SELECTION].
•
Use [LEFT] or [RIGHT] button to set up the [ON] or
[OFF] on the [STATE].
28
•
Use [UP] or [DOWN] to select an option then use
[LEFT] or [RIGHT] button to adjust the option.
>
POSITION
,/
the mask.
>
POSITION
;.
the mask.
>
SIZE
: Enlarge or decrease the
,/
horizontal size of the mask.
>
SIZE
: Enlarge or decrease the vertical
;.
size of the mask.
4.
Use [SENSITIVITY] option to obtain the optimum
detection level.
5.
Use [LEFT] or [RIGHT] button to select the [DISPLAY]
option.
6.
Use [LEFT] or [RIGHT] button to select the [ALARM
OUT] option.
: Moves horizontal position of
: Moves vertical position of
Advertisement
Table of Contents
