Menu Operation
Motion Detection Setting
The motion detection detects the moving objects in the
scene by monitoring changes in brightness level.
1.
Select [MOTION DET] option.
2.
Use [LEFT] or [RIGHT] button to select [ON] and press
[SET]. The MOTION DETECTION menu appears.
3.
Use [LEFT] or [RIGHT] button to select a Detect Sense
from 0 to 127.
4.
Use [LEFT] or [RIGHT] button to set up the ON or OFF
on the Block Display.
5.
Use [LEFT] or [RIGHT] button to set up the ON or OFF
on the Monitor Area.
6.
Use [UP] or [DOWN] to select an Area Select option
from 1 to 4 then use [LEFT] or [RIGHT] button to adjust
the option.
•
TOP: Moves top position on the screen.
•
BOTTOM: Moves bottom position on the screen.
•
LEFT: Moves left position on the screen.
•
RIGHT: Moves right position on the screen.
Note:
When the TOP and BOTTOM value is the same, the block
wouldn't be shown. And increase the top value, the
bottom value would increase too, you could set it after
fixing the top value. While decrease the bottom value, the
top value would decrease too. LEFT and RIGHT relation is
similar too.
27