Selecting The Level Display - JVC KS-FX250 Instructions Manual

Selecting the level display

You can select the level display according to your preference.
When shipped from the factory, "AUDIO 2" is selected.
AUDIO1: Shows the audio level indicator.
AUDIO2: Alternates "AUDIO 1" setting and illumination display.
OFF : Erases the audio level indicator.
3
1
2
3
4
1, 4
Press and hold SEL for more than 2 seconds.
"CLOCK H", "CLOCK M", "SCM LINK", "LEVEL", "AREA",
"B.SKIP" or "LINE IN " appears on the display.
Displayed only when one of the following sources is selected —
FM, AM and TAPE.
Select "LEVEL" if not shown on the display.
Select the desired mode — "AUDIO 1",
"AUDIO 2" or "OFF".
Finish the setting.
2
19