Canceling Advanced Scm; Selecting The Level Display - JVC KS-FX470 Instructions Manual

1
CLOCK H
CLOCK M
SCM LINK
LEVEL
DIMMER
B. SKIP
*
EXT IN
* Displayed only when one of the following sources is selected — FM, AM and tape.
• Press SEL (select) when the setting is complete.

Canceling Advanced SCM

You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON: Advanced SCM (different sound modes for different sources)
• LINK OFF: Conventional SCM (one sound mode for all sources)
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "SCM LINK" with ¢
3. Select the desired mode with the control dial.
The SCM LINK mode changes as follows:

Selecting the level display

You can select the level display according to your preference.
When shipped from the factory, "AUDIO 2" is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
• AUDIO 2: Alternates "AUDIO 1" setting and illumination display.
• OFF: Erases the audio level indicator and the equalization pattern indicator.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "LEVEL" with ¢
3. Select the desired mode with the control dial.
The level display setting changes as follows:
2
Select.
Hour adjustment
Minute adjustment
Sound control
memory linkage
Level display
Dimmer
Blank skip
External component
or 4
or 4
AUDIO 1
3
Advance
Back
Back Advance
LINK OFF LINK ON
AUDIO 1 AUDIO 2
OFF
AUTO OFF
ON
OFF ON
CHANGER LINE IN
.
LINK ON
.
AUDIO 2
Factory-preset
settings
Set.
1:00
LINK ON
AUDIO 2
AUTO
OFF
CHANGER
LINK OFF
OFF
See
page
19
below
below
22
13
22
21