To Cancel Advanced Scm; Selecting The Level Display - JVC KD-S700 Instructions For Use & Installation

To Cancel Advanced SCM

You can cancel the Advanced SCM (Sound Control
Memory), and unlink the sound modes and the
playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source so
that you can change the sound modes simply by
changing the sources.
LINK ON: Advanced SCM (different sound mode
for different sources)
LINK OFF: Conventional SCM (one sound mode
for all sources)
1
Press and hold SEL for more than
2 seconds.
"CLOCK H", "CLOCK M", "SCM LINK" or
"LEVEL" appears on the display.
2
Select "SCM LINK" if not shown on
the display.
3
Select the desired mode — "LINK
ON" or "LINK OFF".
4
Press SEL (select) to finish the
setting.
18

Selecting the level display

You can select the level display according to your
preference.
When shipped from the factory, "AUDIO 2" is
selected.
AUDIO 1: Level meter illuminates from bottom to
top.
AUDIO 2: Alternates level meter (moves from
bottom to top) and illumination display.
OFF: Erases the audio level indicator.
1
Press and hold SEL for more than
2 seconds.
"CLOCK H", "CLOCK M", "SCM LINK" or
"LEVEL" appears on the display.
2
Select "LEVEL" if not shown on the
display.
3
Select the desired mode —
"AUDIO 1", AUDIO 2" or "OFF".
4
Press SEL (select) to finish the
setting.