Figure 27:Add Target Portal; Figure 28:Log On To An Available Target - HP ISCSI SR2122 Getting Started Manual

Serving Storage to the iSCSI Initiators from the SR2122 over IP
Figure 27: Add Target Portal
Next, click on the Available Targets tab to list the targets found through the Available Portals.
The Status should be Inactive.
Next, log into the target to discover the SR2122 LUNs by selecting a Target and clicking on
Log On.
Figure 28: Log On to an Available Target
Note: It is important to enable Automatic Restore if the server is to automatically login to the
SR2122 target when the server is powered up or rebooted. If not, then the Available Targets must be
logged in manually.
iSCSI SR2122 Storage Router: Getting Started Guide 39