HP ISCSI SR2122 Getting Started Manual page 54

Serving Storage to the iSCSI Initiators from the SR2122 over IP
Node A
Node B
Note:
address's DNS name.
The iSCSI Target(s) on both SR212 routers must contain the same MSCS Cluster Access List
Entry to ensure proper failover/failback of the iSCSI disk drives.
SR2122 Name
Node A
Node B
Next, add both Router Instance IP addresses to each MSCS Cluster member's iSCSI driver.
Open the hp iSCSI Config configuration screen and add the IP addresses of the SCSI Router
Instances from each SR2122 Node A and Node B, 33.33.33.103 and 33.33.33.104,
respectively
ARTICX0015
ARTICX0031
A reboot of both MSCS Cluster members is necessary in order for these changes to take effect.
54
SR2122 Name
The Access List Name assigned to the IP address does not necessarily have to be the IP
Router Instance/ IP
Address
ISCSI03_Disks
33.33.33.103
ISCSI03_Disks
33.33.33.104
MSCS Cluster Member
Access List Entry name
ArticX-Cluster
ArticX-Cluster
Target
Name
HSV23_T1
HSV23_T2
Add Router Instance IP Addresses
33.33.33.103
33.33.33.104
33.33.33.103
33.33.33.104
iSCSI SR2122 Storage Router: Getting Started Guide
Access List Entries
33.33.33.01
33.33.33.02
33.33.33.01
33.33.33.02
Access List Entry Assigned
to this Target
ArticX-Cluster
ArticX-Cluster