Bypassing/Unbypassing Burglary Protection; Bypassing Protection Points - ADT Focus Cadet User Manual

Untyped Alarm Weak Battery
2-Man 2 ND Person
Keypad Lockout
Cardreader Irregular Access
Manual Pushbutton Access – remote arm/disarm opening
Access Denied Code Known – access denied
Access Denied Code Unknown – access denied
Dialer Test Report
Dialer Test Report with System Trouble Present

Bypassing/Unbypassing Burglary Protection

Bypassing a point or part of the burglary protection will cause the system to
ignore that point or portion of protection until it is unbypassed (restored to
normal operation) or the system is turned off.
Bypassing may be required to ignore a malfunctioning device or to allow
access to permanently secured areas. Only those users assigned the privilege
level of "Can Bypass BA" may bypass and unbypass protection.

Bypassing Protection Points

Note: A bypassed point cannot detect intrusion or an alarm condition.
Before resorting to bypassing a point, attempt to repair or correct the
problem.
1. Using the operating panel's numeric keypad, enter a valid ID code that
has been assigned the privilege level of "Can bypass BA."
2. Press More twice to display Action Menu 3.
3. Press Bypass to display the Bypass Selection Menu 1.
System Operation (cont'd)
Description
System Test (continued)
Access
Dialer Test
Alpha
U WEAK BAT
ACCESS 2ND
KEYPD LOCK
IRR ACCESS
MAP ACCESS
DENIED NA
INVALID NA
DLR TEST
TBL TEST
– 67 –