X-Rite SpectraLight III Operation Manual page 7

Right Panel
Rear Panel
Side Tabs
Left Panel Right Panel
Rear Panel
Thumbscrew
Left Panel
Figure 4. Right Panel Into Rear and Bottom Panel
7. Slide the pivot slots on the front panel (#5) onto the pivots located on each of the two side panels.
8. Flex the side panels as necessary so that both ends of the front panel rest on their respective pivots.
9. Pivot the front panel upwards toward the unit and secure it in place by rotating it about the pivots and locking in
place with the left and right side panel spring clips. See Figure 5.
Front Panel
Side Panel Spring Clips
Front Panel Notches
Pivot
Front Panel
Figure 5. Front Panel Assembly
Page 7