Setting Your Machine For The First Time - Brother 882-C40 Operational Manual

TURNING THE MACHINE ON/OFF
a
Insert the power supply cord into the power
cord receptacle, then insert the plug into a
wall outlet.
a Main power switch
b Power supply cord
b
Turn the main power switch to "I" to turn
on the machine.
a OFF
b ON
Note
• When the straight stitch needle plate is on
the machine, the needle will automatically
move to the middle position.
Memo
• When the machine is turned on, the needle
and the feed dogs will make sound when
they move; this is not a malfunction.
c
When the machine is turned on, the
opening movie is played. Touch anywhere
on the screen to display the Home page
screen.
CAUTION
• Only touch the screen with your finger or the
included touch pen. Do not use a sharp pencil,
screwdriver, or other hard or sharp object. It is
not necessary to press hard on the screen.
Pressing too hard or using a sharp object may
damage the screen.
B-22
d
Turn the main power switch to "O" to turn
off the machine.
Memo
• If the machine is turned off in the middle of
sewing in the "Sewing" function, the
operation will not continued after turning the
power on again.
Setting Your Machine for the First
Time
When you first turn on the machine, set the
language and time/date to your language and local
time/date. Follow the procedure below when the
settings screen appears automatically.
a
Press and to set your local language.
b
Press .
c
The message screen, confirming if you want
to set time/date, appears. To set the
time/date, press
setting, press
→ The screen to set time/date appears.
; to cancel the
.