Notes On Power Management - Fujitsu B17-5 ECO Operating Manual

In switch position "0" (ECO), green standby mode is activated, in which the monitor
consumes ≤ 0.1 W. If the monitor cannot be switched on and remains dark, the switch
must be set to "-" (BASIC). The monitor then consumes < 1 W in standby mode.
► Switch the device on using the ON/OFF switch.
Only switch on the computer after you have switched on the monitor.

Notes on power management

If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not distinguish between the individual energy-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Stage
Power supply
indicator
Monitor
Power consumption
(typical)
If your computer detects inactivity (no input), it sends an appropriate signal to the monitor to reduce
the power consumption (energy-saving mode). The power indicator of the monitor changes colour to
indicate the status change. ECO and Green Standby Mode are the preset factory defaults.
Once an input is made at the computer the screen contents are restored.
For detailed information on how energy-saving mode operates, please refer to
the operating manual or technical manual of the computer.
A26361-K1317-Z220-1-7619, edition 2
Operation
Normal
ECO
Lights up blue Lights up green
Max. brightness typ. 200 cd/m
B17-5 : < 24 W B17-5 : < 17 W
B19-5 : < 28 W B19-5 : < 19 W
Power saving mode
Green Standby
Mode
unlit
Unlit
2
reduced to
≤ 0.1 W
Operation
Compatible
Lights up orange
Unlit
reduced to
< 1 W
15