Fujitsu B17-5 ECO Operating Manual page 29

Adjusting the display of the OSD menu
Language
OSDH position
OSDV position
OSDTimeout
OSD Rotation
Setting functions in the Advanced menu
Input select
DDC-CI
Factory Recall
A26361-K1317-Z220-1-7619, edition 2
Calling the OSD Setup adjustment window
Selecting the language for the OSD menu
With this function you choose between English (default setting), French,
German, Italian and Spanish as the language for the OSD menu.
Setting the horizontal position of the OSD menu
With this function you can move the OSD menu to the left or to the right.
Setting the vertical position of the OSD menu
With this function you can move the OSD menu up or down.
Setting the display duration of the OSD menu
With this function you can select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically hidden.
With this function you switch the OSD menu from portrait mode to landscape
mode and vice versa.
Off = The OSD menu is displayed in portrait mode.
On = The OSD menu is displayed in landscape mode.
Call up the Advanced setting window
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, when two signal sources are connected.
This is on condition that the graphic card supports this function.
Activation/deactivation of the DDC-CI
On = The DDC-CI function is enabled (standard setting)
Off = The DDC-CI function is disabled
Activating the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
Press the SELECT/MENU
Processing message is displayed.
button to activate the function. The Auto
Operation
21