Osd Menu Functions; Adjusting The Brightness And Contrast - Fujitsu B17-5 ECO Operating Manual

If you wish to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described below.

OSD menu functions

The OSD menu for analog monitor operation is described below. During
digital operation some functions are not available, as they are not required
due to the digital transmission technology used.

Adjusting the brightness and contrast

Brightness
Contrast
Black level
Auto level
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
A26361-K1317-Z220-1-7619, edition 2
Call up the Brightness/Contrast setting window
Set the brightness of the display
With this function you change the brightness of the background lighting.
You can see whether the ECO operating mode is active under the bar for
displaying the brightness setting.
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the button.
SELECT / MENU
Operation
19