Changing The Monitor Settings; Changing The Monitor Settings With The Buttons Of The Control Panel - Fujitsu B17-5 ECO Operating Manual

Operation

Changing the monitor settings

When putting the monitor into operation for the first time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
SELECT/ MENU
1 = Buttons for the OSD menu (On-Screen
Display)
2 = Power supply indicator
Performing auto-adjustment of the monitor
► Press the EXIT / AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting input signal (D-SUB/DVI-D)
► Press the Back /
► Press the Forwards / ECO button or the Back /
desired monitor connection (VGA or DVI).
This setting window can also be called when the OSD menu is locked.
16
ECO
1
button for about 1 second.
INPUT button to open the Input select setting window.
EXIT / AUTO
INPUT
3 = ON/OFF switch
button to select the
INPUT
A26361-K1317-Z220-1-7619, edition 2
2 3