Basic Sewing (2)
Make sure the power to the machine is off before changing presser feet.
Rolled Hem Foot
Attach rolled hem foot.
Refer to page 17 for instructions
on changing sewing feet.
Position the fabric (reverse side
facing up) under the presser
foot. Insert needle approximately
0.5 cm from the edge of the
fabric and sew 2 stitches.
Turn the hand wheel towards
you to raise the needle, raise the
presser foot, then pull the fabric
Be sure not to unthread the
fabric while pulling it forward.
Hold the 4 threads in your left
With your right hand, put the
edge of the rolled hem under
the presser foot, from the spot
where the threads come out.
Insert the edge so that it lies
directly under the needle. Lower
the presser foot.
Pull gently on threads in left
hand while sewing the first 3-4
stitches to hold them in place.
Fold hem over about 0.5 cm and
continue feeding folded hem
under foot while sewing towards
the curved guide on the foot.