Getting Started - Cisco WAP121 Administration Manual

Getting Started

Getting Started
STEP 8
STEP 9
STEP 10
STEP 11
STEP 12
STEP 13
STEP 14
Getting Started
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
Enter a Network Name. This name serves as the SSID for the default wireless
network.
Click Next. The Enable Security - Secure Your Wireless Network window
displays.
Choose a security encryption type and enter a security key. For a description of
these options, see System Security, page
Click Next. The Wizard displays the Enable Security- Confirm Security Settings
window.
Review the settings that you configured. Click Back to reconfigure one or more
settings. If you click Cancel, all settings are returned to the previous or default
values.
If they are correct, click Submit. Your WAP setup settings will be saved and a
confirmation window displays
Click Finish. The Getting Started window displays.
To simplify device configuration through quick navigation, the Getting Started
page provides links for performing common tasks. The Getting Started page is
the default window every time you log into the web-based configuration utility and
it provides links for performing common tasks.
Links on the Getting Started Page
Category Link Name (on the Page)
Initial Setup Run Setup Wizard
Configure Radio Settings
Configure Wireless Network Settings
Configure LAN Settings
Run WPS
Device System Summary
Status
Wireless Status
106.
Linked Page
Using the Access
Point Setup Wizard
Radio
Networks
LAN Settings
WPS Setup
System Summary
Network Interfaces
1
11