Scheduler; Adding Scheduler Profiles - Cisco WAP121 Administration Manual

Wireless Settings

Scheduler

Scheduler
STEP 1
STEP 2
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
The Radio and VAP Scheduler allows you to configure a rule with a specific time
interval for VAPs or radios to be operational, thereby automating the enabling or
disabling of the VAPs and radio.
One way you can use this feature is to schedule the radio to operate only during
the office working hours in order to achieve security and reduce power
consumption. You can also use the Scheduler to allow access to VAPs for wireless
clients only during specific times of day.
The WAP device supports up to 16 profiles. Only valid rules are added to the
profile. Up to 16 rules are grouped together to form a scheduling profile. Periodic
time entries belonging to the same profile cannot overlap.

Adding Scheduler Profiles

You can create up to 16 scheduler profile names. By default, no profiles are
created.
To view Scheduler status and add a Scheduler profile:
Click Wireless > Scheduler in the navigation window.
Ensure that the Administrative Mode is enabled. By default it is disabled.
The Scheduler Operational Status area indicates the current operation status of
the Scheduler:
• Status—The operational status of the Scheduler. The range is Up or Down.
The default is Down.
• Reason—The reason for the scheduler operational status. Possible values
are:
- IsActive—The scheduler is administratively enabled.
- ConfigDown—Operational status is down because global configuration
is disabled.
- TimeNotSet—Time is not set on the WAP device either manually or
through NTP.
5
83