Cisco WAP121 Administration Manual page 92

Wireless Settings
Work Group Bridge
STEP 4
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
• Broadcast SSID (downstream only)—Select On if you want the downstream
SSID to be broadcast. SSID Broadcast is enabled by default.
• Security—The type of security to use for authenticating as a client station
on the upstream WAP device and for authenticating downstream client
stations to the WAP device. Choices are:
- None
- Static WEP
- WPA Personal
- WPA Enterprise (Upstream only)
Configure the infrastructure client interface with the same SSID and security
settings as advertised by upstream WAP device. The infrastructure client
interface will be associated to the upstream WAP device with the configured
credentials. The WAP device may obtain its IP address from a DHCP server
on the upstream link. Alternatively, you can assign a static IP address.
In the downstream direction, clients associate to the access point interface.
See Configuring Security Settings, page 74
and WPA Personal security settings.
• MAC Filtering (downstream only)—Select one of these options:
- Disabled—The set of clients in the APs BSS that can access the
upstream network is not restricted to the clients specified in a MAC
address list.
- Local—The set of clients in the APs BSS that can access the upstream
network is restricted to the clients specified in a locally defined MAC
address list.
- RADIUS—The set of clients in the APs BSS that can access the upstream
network is restricted to the clients specified in a MAC address list on a
RADIUS server.
If you select Local or RADIUS, see
on creating the MAC filter list.
• VLAN ID—The VLAN associated with the BSS.
Click Save. The changes are saved to the Running Configuration and to the Startup
Configuration.
for information about WEP
MAC Filtering, page 86
5
for instructions
92