Client Quality of Service
Class Map
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
0–1023—Well Known Ports
1024–49151—Registered Ports
49152–65535—Dynamic and/or Private Ports
•
EtherType—Compares the match criteria against the value in the header of
an Ethernet frame.
Select an EtherType keyword or enter an EtherType value to specify the
match criteria.
-
Select from List—Matches the Ethertype in the datagram header with
the selected protocol types: appletalk, arp, ipv4, ipv6, ipx, netbios,
pppoe.
-
Match to Value—Matches the Ethertype in the datagram header with a
custom protocol identifier that you specify. The value can be a four-digit
hexadecimal number in the range of 0600–FFFF.
•
Class of Service—A class of service 802. 1 p user priority value to be
matched for the packets. The valid range is from 0 to 7.
•
Source MAC Address—A source MAC address to compare against an
Ethernet frame.
•
Source MAC Mask—The source MAC address mask specifying which bits
in the destination MAC to compare against an Ethernet frame.
An f indicates that the address bit is significant, and a 0 indicates that the
address bit is to be ignored. A MAC mask of ff:ff:ff:ff:ff:ff matches a single
MAC address.
•
Destination MAC Address—The destination MAC address to compare
against an Ethernet frame.
•
Destination MAC Mask—The destination MAC address mask specifying
which bits in the destination MAC to compare against an Ethernet frame.
An f indicates that the address bit is significant, and a 0 indicates that the
address bit is to be ignored. A MAC mask of ff:ff:ff:ff:ff:ff matches a single
MAC address.
•
VLAN ID—A VLAN ID to be matched for packets. The VLAN ID range is
from 0 to 4095.
The Service Type fields below display for IPv4 only. You can specify one type
of service to use in matching packets to class criteria.
7
123