Cisco WAP121 Administration Manual page 58

LAN Settings
LAN Settings
STEP 5
NOTE
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
• Static IPv6 Address—The static IPv6 address. The WAP device can have a
static IPv6 address even if addresses have already been configured
automatically.
• Static IPv6 Address Prefix Length—The prefix length of the static address,
which is an integer in the range of 0 to 128.
• IPv6 Autoconfigured Global Addresses—If the WAP device has been
assigned one or more IPv6 addresses automatically, the addresses are
listed.
• IPv6 Link Local Address—The IPv6 address used by the local physical link.
The link local address is not configurable and is assigned by using the IPv6
Neighbor Discovery process.
• Default IPv6 Gateway—The statically-configured default IPv6 gateway.
Click Save. The settings are saved to the Running Configuration and the Startup
Configuration.
After new settings are saved, the corresponding processes may be stopped and
restarted. When this happens, the WAP device may lose connectivity. We
recommend that you change WAP device settings when it will least affect your
wireless clients.
4
58