Using Tv Features; Selecting An Input; Sleep Timer - Mitsubishi Electric Unisen LT-52151 Owner's Manual

3

Using TV Features

Selecting an Input

The Activity menu lets you switch TV inputs. If you
named devices during Auto Input Sensing, the inputs
are organized into groups based on possible ways to
use each device.
1.
ACTIVITY key.
Press the
2.
Use to move through groups of TV inputs.
3.
Use to select an input.
4.
Press ENTER to switch to the input.
• To change the list of inputs shown in each activity
group, see Inputs > Activity, page 50.
• To assign or change the names of input icons, use
the Inputs > Name menu, page 50.

Sleep Timer

The Sleep Timer turns the TV off after the length of time
you set.
To set the TV to turn on at a certain time of day, see the
Initial > Timer menu on page 47.
Setting the Sleep Timer
1.
MORE on the remote control. The TV's MORE
Press
menu will display.
2.
CANCEL (SLEEP) repeatedly to increase the
Press
time in 30-minute increments. The maximum is 120
minutes.
3.
Press BACK or wait five seconds without pressing
any keys for the message to disappear.
Viewing or Changing the Sleep Timer
1.
Press MORE.
2.
Press CANCEL (SLEEP).
3.
CANCEL (SLEEP) additional times to change
Press
the number of minutes before the TV powers off.
SLEEP
With the MORE menu displayed, press the CANCEL
key on the remote control to activate or deactivate the
Sleep feature.
25