Using A K-Mount Lens - Pentax Q7 Operating Manual

About Filters
Vignetting will occur at the wide-angle setting if a PL100 filter is
used with a 02 STANDARD ZOOM lens.

Using a K-Mount Lens

A K-mount lens can be attached to this camera with the use of
the optional Adapter Q for K Mount Lens. When a K-mount lens
is used, the focal length must be set manually for some
functions such as Shake Reduction, since the focal length
cannot be obtained automatically.
1
Turn the camera off.
2
Attach the adapter and lens to the camera, and
turn the camera on.
The [Input Focal Length] screen appears.
3
Set the lens focal length.
Available operations
AB Changes the value of each digit.
CD Selects a digit.
V Selects a value from the list.
When using a zoom lens, select the actual focal length
which the zoom is set to.
4
tMemo
• The focal length setting can be changed in [Input Focal
• When the Adapter Q for K Mount Lens is used, the camera
• Refer to the Adapter Q for K mount lens manual for details.
15.0 15.0
Input Focal Length Input Focal Length
21.0 21.0
35.0 35.0
55.0 55.0
0000.0 0000.0
77.0 77.0 mm mm
135.0 135.0
200.0 200.0
300.0 300.0
Cancel Cancel OK OK
MENU OK
Press E.
The camera returns to standby mode.
Length] of the A2 menu.
operates in J mode when the capture mode is set to other
than L mode.
6
73