Pentax Q7 Operating Manual page 46

White Balance
g Auto
h Daylight
i Shade
j Cloudy
q Fluorescent - Daylight Color
3
r Fluorescent - Daylight White
k
s Fluorescent - Cool White
t Fluorescent - Warm White
l Tungsten
m Flash
n Color Temperature Enhancement
o Manual 1 to 3
Proceed to Step 5 if you do not need to change the parameters.
3
Press J.
The fine-tuning screen appears.
Available operations
AB Adjust: Green-Magenta
CD Adjust: Blue-Amber
M Resets the adjustment value to the default
setting.
4
Press E.
The screen of Step 2 reappears.
44
5
Color Temperature
Approx. 4,000 to
8,000K
tMemo
Approx. 5,200K
• You can set the white balance for when the flash discharges
Approx. 8,000K
Approx. 6,000K
Approx. 6,500K
Approx. 5,000K
Measure the white balance of a location.
Approx. 4,200K
Approx. 3,000K
1
Approx. 2,850K
2
Approx. 5,400K
–
–
3
G3 G3 A2 A2
Cancel Cancel ±0 ±0 OK OK
MENU OK
4
tMemo
• You can copy the white balance settings of a captured image
Press E.
The camera returns to standby mode.
in [6. WB When Using Flash] of the E1 menu.
Adjusting the White Balance Manually
Select o in Step 2 on p.43 and press B.
Use CD to select o1 to
o3.
Under the light you wish to measure the white
balance of, select a white area as the subject,
and press the shutter release button fully.
Adjust the white balance as necessary.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press
the white balance.
Press E.
The camera returns to standby mode.
and save it as o1 to o3 in [Save as Manual WB] of the
playback mode palette. (p.50)
Manual White Balance Manual White Balance
Adjust Adjust
SHUTTER
MENU Cancel Cancel WB± WB± OK OK
OK
E to remeasure