Initial Settings; Turning The Camera On; Setting The Display Language - Pentax Q7 Operating Manual

4
Close the card cover, and
slide it in the direction of
4.
uCaution
• Do not remove the memory card while the card access lamp
is lit.
• If the card cover is opened while the power is on, the camera
will turn off. Do not open the cover while the camera is in use.
• Use this camera to format (initialize) a memory card that is
unused or has been used on other devices. (p.26)
• Use a high-speed memory card when recording movies. If a
write speed cannot keep up with a recording speed, the
writing may stop during recording.

Initial Settings

Turn the camera on and make the initial settings
4
3

Turning the Camera On

1
Press the power switch.
Press the switch again to turn off
the camera.
The first time the camera is
turned on after purchasing, the
[Language/W] screen appears.
tMemo
• The power will automatically turn off when you do not perform
any operations within a set period of time. (Default setting: 1min.)
You can change the setting in [Auto Power Off] of the D3 menu.

Setting the Display Language

1
Use ABCD to select the desired language and
press E.
The [Initial Setting] screen
appears in the selected language.
Proceed to Step 6 if
(Hometown) does not need to be
changed.
2
Press B to move the frame
to F and press D.
The
F
[F Hometown] screen appears.
2
Initial Setting Initial Setting
English English
New York New York
Settings complete Settings complete
Cancel Cancel
MENU
25