Setting Dip Switches; Installing Paper - Epson TM-C3400 User Manual

Setting DIP Switches

When you open the ink cartridge cover and remove the DIP switch
cover, you will find the DIP switches. Set the DIP switches, using the
tip of a tool, such as a small screwdriver. Change settings when the
printer is off.

Installing Paper

Follow the steps below to install the paper.
❏ When you install paper on the printer for the first time:
❏ When you have used up the paper (when you install same type of
➀
paper): and
❏ When you change the paper type:
➂
For and later, the procedures differ depending on the paper form,
roll paper or fanfold paper.
CAUTION:
Be sure to confirm that DIP switch 3 (Paper selection) is set correctly
before installing the paper.
➁
When installing roll paper
➂
Removing the paper feed guide
➃
Adjusting the guides
➄
Loading the paper
and Turning on the printer
SW Function
1 Operation of the
power switch
2 Internal use
3 Paper selection
8 Buzzer volume
➄
➀
➀
Removing paper
Setting paper position detection
When installing fanfold paper
➂
Attaching the paper feed guide
➃
and Turning on the printer
English
ON OFF
Reset Power on/off
Fixed to OFF (Do not change.)
Fanfold paper Roll paper
High Low
➁
∼
➄
∼
Adjusting the guides
➄
Loading the paper
TM-C3400 User's Manual 9
➄