Epson TM-C3400 User Manual page 11

➁
Setting paper position detection
When paper position detection setting does not need to be changed,
skip this step. Use the printer driver for this setting.
CAUTION:
When paper remains in the printer, paper position detection cannot be
set. Be sure to remove the paper before turning on the printer.
1. Turn on the printer.
Paper Position Detection
2. Change [
Utilities
] tab of the printer driver depending on the paper to use.
Note:
For information on how to display the printer driver, see page 18.
3. Turn off the printer.
CAUTION:
The changed setting of the paper position detection is stored in the
printer when the printer is turned off. Be sure to turn off the printer to
enable the setting.
When Installing Roll Paper
➂
Removing the paper feed guide
CAUTION:
The paper feed guide should be attached to the printer only when you
use fanfold paper. Be sure to remove the paper feed guide when you
use roll paper.
1. Pull the release lever to open the roll paper cover.
2. If the paper feed guide is attached into the grooves inside of the
roll paper cover, remove it.
3. Close the roll paper cover.
English
Maintenance And
] on the [
TM-C3400 User's Manual 11