Installing The Printer; Connecting The Ac Cable - Epson TM-C3400 User Manual

English
Setup
Follow in order the steps below to set up the printer.
1. Installing the printer (See page 6.)
2. Connecting the AC cable (See page 6.)
3. Installing the ink cartridge (See page 7.)
4. Installing the printer driver and connecting the printer to the
computer (See page 7.)
5. Setting the DIP switches (See page 9.)
6. Installing the paper (See page 9.)
7. Attaching/adjusting the paper ejection tray (See page 17.)

Installing the Printer

❏ The printer must be installed horizontally.
❏ Leave enough space in front of the printer for the ink cartridge
cover and the roll paper cover to be fully opened.
❏ Do not place the printer in dusty locations.
❏ Protect the printer from heavy impacts. They may cause defective
print.
❏ Do not allow cables to catch or foreign matter to accumulate under
the printer.

Connecting the AC Cable

WARNING:
Always use the EPSON PS-180 as the AC adapter. Using the other AC
adapter can result in electric shock and fire.
Should a fault ever occur in the EPSON PS-180, immediately turn off the
power to the printer and remove the AC cable from the wall socket.
Insert the connector of the AC cable to into the AC inlet, and then
insert the power plug of the AC cable into the wall socket.
6 TM-C3400 User's Manual