Aquaflex Massage Control; Constant Mode; Basic Mode - La-Z-Boy Spas Dream Owner's Manual

Each Reclina-Seat has its own individual AquaFlex Massage Control that allows you to
select massage techniques similar to those of professional masseuses. You can select
from three operating modes: Constant, Basic, and Cycle.
Figure 22 - AquaFlex Massage Control Callouts
In CONSTANT mode, the jet pressure remains steady and can be increased or
decreased to the desired intensity. In the BASIC and CYCLE mode, the jet pressure
varies by pre-programmed settings (intensity cannot be manually adjusted).

Constant Mode

1. Press the On/Off (Power) button
to 40%, see water circulating in the Reclina-Seat, observe that the CONSTANT
(right-most) status light displays, and see the number 04 in the LED Display. Water
should uniformly stream from all jets in this Comfort Zone/Reclina-Seat.
2. Press and hold down the Intensity button
increase in steps of 10% and see the LED display increment. To lower the speed,
release the button and hold it down again (decreases in steps of 10% as above).
3. Press to manually turn off the control
After selecting the desired mode, the pump runs for 12-15 minutes in that mode after
which time it slows*.

Basic Mode

Basic mode provides seven pre-programmed massage patterns that vary
*For Pump 3 (and Pump 1 in filter cycle mode), it slows to 40% and turns off after 30 minutes. For Pump
1 in constant filtration mode it slows to 10% but does not shut off.
For HELP, call La-Z-Boy

AquaFlex Massage Control

. You should hear the AquaFlex motor turn on
Spas at 1.800.465.2933.
®
®
. You should hear the motor speed
41