Location And Installation; Clearances And Support - La-Z-Boy Spas Dream Owner's Manual

Proper planning is an important consideration when installing your new
Site selection is a critical step and requires serious thought. Planning ahead makes the
installation process easier. The following information is provided to assist you in site
preparations.
1. Always comply with local building codes and obtain any necessary permits. You
may also need to consult with an engineer to address your specific design
needs.
2. Contact an electrician to assess your electrical needs, install wiring, and assure
a safe operation.
3. Position your
4. Place your
support its weight. For external installations, a 4-inch (10 cm) thick cement pad
suffices. See page 15 for conduit entry locations for your model spa.
5. For internal installations, check the load carrying capabilities of the floor on
which the spa
square foot.
6. Assure that your
delivery route will accommodate its large size.
7. Provide adequate ventilation for the humidity created by your spa / hot tub. In
most cases, the Color Coordinated Cover is sufficient.
8. Protect the pump and all equipment from the weather by ensuring the cabinet
panels are secure at all times.
9. Allow 36 inches (1 meter) of unobstructed access to all sides of your
tub for normal servicing. Your
ground or in a deck.
For HELP, call La-Z-Boy

Location and Installation

spa / hot tub with proper access to water, drainage, and electricity.
spa / hot tub on a uniform solid, flat surface designed to properly
will reside. Most homes meet the requirement of 80 pounds per
spa / hot tub
spa / hot tub
Figure 1 – Clearances and Support
Spas at 1.800.465.2933.
®
will fit into the space you have chosen and the
is not designed to be recessed in the
14
spa / hot tub.
spa / hot