If it is necessary to replace the audio cable, disconnect the audio cable from the 3 audio connectors
11.
on the system board. The audio cable is included in the Cable Kit, spare part number
446406-001.
If it is necessary to replace the modem module cable, remove the RJ-11 connector (1) from the clip
12.
built into the base enclosure.
Remove the modem module cable (2) from the clips and routing channels built into the base
13.
enclosure. The modem module cable is included in the Cable Kit, spare part number 446406-001.
Reverse the preceding procedure to install the system board.
Component replacement procedures
87