HP Compaq 6910p Maintenance And Service Manual page 66

Loosen the three Torx T8M2.5×11.0 screws that secure the keyboard to the computer.
2.
Turn the computer display-side up, with the front toward you.
3.
Open the computer as far as possible.
4.
Slide the four keyboard retention tabs (1) toward you. The tabs are located between the
5.
f1 keys, between the
keys.
Lift the rear edge of the keyboard (2) and swing it toward you until it rests on the palm rest.
6.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
7.
disconnect the keyboard cable (2) from the system board.
58 Chapter 4 Removal and replacement procedures
f4 and f5 keys, between the f8 and f9 keys, and between the
esc and
f12 and scroll