HP Compaq 6910p Maintenance And Service Manual page 82

Remove the display bezel (3). The display bezel is available using spare part number
11.
446420-001.
Remove the two Phillips PM2.5×4.0 screws (1) and the two Phillips PM2.5×6.0 screws (2) that
12.
secure the display hinge to the display panel.
Remove the display hinges (3). The left and right display hinges are available using spare part
13.
number 446417-001.
CAUTION:
of the display left hinge is routed and arranged properly. This antenna cable has a grounding sleeve
(1) and an exposed section of cable (2). The grounding sleeve must completely cover the exposed section
of cable, and must be in contact with the grounding clip (3) on the left display hinge.
Failure to follow these routing instructions can result in degradation of the computer's WLAN and WWAN
performance.
74 Chapter 4 Removal and replacement procedures
When installing the display assembly, be sure that the wireless antenna cable routed out