HP Compaq 6910p Maintenance And Service Manual page 94
Hide thumbs
Also See for Compaq 6910p:
- Quickspecs (55 pages) ,
- Specifications (46 pages) ,
- User manual (34 pages)
Table of Contents
Advertisement
Remove the four Phillips PM2.5×4.0 screws (1) and the two Phillips PM2.0×3.0 screws (2) that
8.
secure the system board to the base enclosure.
Use the optical drive connector (1) to lift the right side of the system board (2) until it rests at an
9.
angle.
Remove the system board (3) by sliding it away from the base enclosure at an angle.
10.
86
Chapter 4 Removal and replacement procedures
Advertisement
Table of Contents
