Table of Contents
Advertisement
Restore Settings — Click "Browse..." to select a saved configuration file from your
computer, then click "Upload" to transfer the configuration file to the router. After
the configuration is uploaded, the router's current configuration will be replaced
by the file you just uploaded.
Restore to Factory Default — Click to reset all settings of the router to the factory
default values.
4.2.2 Firmware Upgrade
The firmware of the router is like the operating system on your computer. Firmware
upgrades for this router may be available at www.intellinet-network.com. If you
experience technical difficulties, you should first check if any updated firmware is
available for the router and install it using this firmware upgrade function.
Next — Click to proceed to the upgrade procedure screen.
Browse — Click to locate the firmware file you've downloaded. If the file is in Zip
(compressed archive) format, you need to uncompress it prior to the upgrade.
Apply — Click to start the firmware upgrade process.
Never interrupt the upgrade process by closing the Web browser or by physically
disconnecting your computer from the router. If the upgrade process is interrupted
by a network problem or a power failure, the router will cease to function. Damages
resulting from improperly performed firmware upgrades are excluded from the
product warranty!
ADDITIONAL FUNCTIONS
61
Advertisement
Table of Contents
