Static Dhcp Leases Table - Intellinet 524988 User Manual

"Start IP" and can't be the same as the router's IP address. Also, the first three
fields of the IP address of "Start IP," "End IP" and "IP Address" in the LAN IP
section (the "a," "b" and "c" fields) should be the same.
Lease Time: Two Weeks (or "Forever" if
you have fewer than 20 computers)
Start IP: 192.168.2.100

2.6.3 Static DHCP Leases Table

This function allows you to assign a static IP address to a specific computer forever,
so you don't need to set the IP address for a computer to enjoy the benefit of using
a DHCP server. A maximum of 16 static IP addresses can be assigned here.
NOTE: If you set "Lease Time" to "Forever" in the DHCP Server section, you can
also assign an IP address to a specific computer permanently; however, you won't
be able to assign a certain IP address to a specific computer, since IP addresses
will be assigned in random order this way.
Enable Static DHCP Leases — Select to enable; de-select to disable.
MAC Address — Enter the MAC address of the computer or network device (a
total of 12 characters, with numerals from 0 to 9 and characters from a to f,
such as 001122aabbcc).
IP Address — Enter the IP address you want to assign to this computer or device.
Click "Add" to include a MAC address and IP address pair into the Static DHCP
Leases table (below). Click "Clear" to remove characters entered in a text field.
To delete a specific item, check the "Select" box of a MAC address and IP address
mapping, then click "Delete Selected." To delete all mappings, click "Delete All." To
deselect all mappings, click "Reset."
RECOMMENDED VALUES
End IP: 192.168.2.200
Domain Name: (leave it blank)
SYSTEM & NETWORK SETUP
31