Stainless Steel - FireplaceXtrordinair 564E User Manual

Metro Mantal shown with Architectural
Antique Nickel Onlays.
Installation Without A Fireplace Cabinet
If you want a flush-to-the wall look for your fireplace, you have the option of building in or framing around your
564 E Fireplace. When framing the 564 E enclosure you must follow the MINIMUM internal opening dimensions shown
below. Before actually beginning the work, please consult with your dealer or go online to www.fireplacex.com for
complete instructions.
The electric fireplace must be able to slide out for service.You must also provide a standard 15 AMP, 110 Volt wall outlet
on the inside of the enclosure. It is preferable that the wall outlet be on its own breaker. The fireplace cannot be hard
wired into the house electrical system. The electric fireplace must be plugged into a wall outlet.
(A) Flush To Floor Framing - For Basic Black
Trim and Metropolitan Face.
CAUTION - Clearance for air circulation beneath the fireplace is critical. DO NOT INSTALL THE FIREPLACE DIRECTLY
ON CARPET, OR SIMILAR SURFACES WHICH MAY RESTRICT AIR CIRCULATION.
www.fireplacex.com
Rectangular Double Door face with Artisan
™
(B) Flush To Floor Framing - For Classic Arch,
(A)
(B) French Country Arch, Artisan & Matrix Faces.

Stainless Steel

Metro Mantel
Introducing the new Metro Mantel™
cabinet for the 564 E Electric Fireplace. As
an alternative to wood cabinet mantels,
the new Metro Mantel is constructed of
brushed nickel sheet metal with a textured
black powder-coated hearth base. As
you can see the Metro Mantel is a striking
contemporary accessory. All Architectural
Double Door faces as well as the
rectangular Metropolitan™ beveled faces
will fit this fireplace and mantel pairing.
Overall, the Metro Mantel measures
36-3/4" tall and is 50-1/8" wide by 18-3/8"
deep at the base. The fireplace easily
slides into the mantel and is firmly held to
™
the base with a bracket across the back.
Add 3/4" for
Matrix Face
(C) Raised Framing - Depending on face
(C) used, use measurements from
(C) illustrations (A) or (B).
™ Option
11