Installation Choices - FireplaceXtrordinair 564E User Manual

Installation Choices

You have two ways to finish the installation of your 564 E Electric fireplace within your home. (1.) You can use one of
our Sterling™ Fireplace Cabinets with a choice of two finishes, or (2.) you can build the 564 E into an existing wall or
chase without a Fireplace Cabinet and finish it off like a traditional fireplace with stone, tile or a flush mantel.
Installation With A Fireplace Cabinet
If you are looking for exceptional value and a quick easy installation, add
one of our Sterling Fireplace Cabinets and you can have your new 564
Electric fireplace installed in less than one hour! These cabinets allow the
fireplace to be installed against any wall in your home. Fireplace Cabinets
make it easy to relocate your fireplace at any time. Take the beauty and heat
to other rooms or take it with you if you move.
A 15 AMP, 110 VOLT wall outlet is required.
A dedicated circuit is preferred, but not essential.
Sterling Fireplace Cabinet Dimensions:
52 5/8" Width at Top
43" Height
16 1/4" Depth at Top
43"
Sterling
Wood Fireplace
Cabinet (Walnut
Finish)
49 7/8"
Sterling
Wood Fireplace
Cabinet (Oak
Finish)
10
564 E Electric Fireplace
49 7/8" Width at Bottom
17 1/2" Depth at Bottom
17 1/2"
NOTE: All faces except the Matrix work with the Sterling Fireplace Cabinet.
Faces
(Choose from 18 different Fireplace Xtrordinair
face designs and finish combinations)
Custom Pre-Built Mantals
Ask you Fireplace
Xtrordinair dealer
about other mantel
options for the 564 E
Electric Fireplace, such
as the Windham™
Mantel manufactured
by J. C. Huffman Co.
shown here. Visit
www. jchuffman.com
for details on their
mantal options.
Sterling™
Fireplace Cabinet
564 E Firebox