120Gb Sata 2.5" Opal1 Sed Solid State Drive; 1Tb 10K Sata 6.0Gb/S 3.5" Hard Disk Drive - HP ProDesk 400 G2 Quickspecs

QuickSpecs
Technical Specifications - Hard Disk and Solid State Storage

120GB SATA 2.5" Opal1 SED Solid State Drive

Unformatted Capacity
Architecture
Interface
NAND Flash
Form Factor
Thickness
Weight
Bandwidth Performance
Power
Mean Time Between Failure
(MTBF)
Environmental
(all conditions, non-condensing)

1TB 10K SATA 6.0Gb/s 3.5" Hard Disk Drive

Capacity
Rotational Speed
Interface
Buffer Size
Logical Blocks
Seek Time (typical reads,
includes controller overhead,
including settling)
Height (nominal)
Width (nominal)
Operating Temperature
120GB SATA 2.5" Opal1 SED Solid State Drive
Self-Encrypting (SED) Solid State Drive with 20nm MLC NAND Flash and SATA interface
Serial ATA (6.0 Gb/s)
20nm MLC NAND Flash
2.5 inch
7 mm
Up to 78 g
Sustained Sequential Read: Up to 540 MB/s
Sustained Sequential
Write:
Random 4k Read:
Random 4k Write:
SATA power consumption: 195 mW (active average); 125 mW (idle average)
1,200,000 hours
Operating Temperature:
Relative Humidity:
Shock:
500,107,862,016 bytes
7,200 rpm
Serial ATA 2.0 (6.0 Gb/s)
16 MB
976,773,168
Single Track:
Average:
Full-Stroke:
0.374 in/9.5 mm
Media diameter: 2.5 in/63.5 mm
Physical size: 2.75 in/70 mm
41° to 131° F (5° to 55° C)
DA - 14982 North America — Version 1 — May 28, 2014
HP ProDesk 400 G2 Microtower Business PC
Up to 480 MB/s
Up to 41K IOPs
Up to 80K IOPs
32° to 158° F (0° to 70° C)
5% to 95%
1,500 G/0.5 ms
2.0 ms
12 ms
25 ms
Page 36