Ford Mondeo Owner's Handbook Manual page 239

If a low pressure warning message
is displayed in the information display,
check the tyre pressures as soon as
possible and inflate them to the
recommended pressure. See
Technical specifications (page
238). If this happens frequently, have
the cause determined and rectified
as soon as possible.
Checking the tyre
pressures
Note: If the tyre pressures are
greater than or equal to 3.3 bar (48
lbf/in²), you will see the + symbol
below the pressure value. The
system only measures pressure up
to 3.3 bar (48 lbf/in²). The + symbol
indicates that the tyre pressures may
be higher.
Tyre press.
0.0
bar
0.0
E74435
1. Press the right arrow button on
the steering wheel to enter the
main menu.
2. Highlight Information with the
up and down buttons and press
the right arrow button.
Wheels and tyres
0.0
bar
0.0
237
3. Highlight Tyre Pressures with
the up and down buttons and
press the right arrow button.
4. Highlight the desired setting and
press the OK button to confirm
the setting.
5. Press the left arrow button to exit
the menu. Hold the left arrow
button pressed to return to the
trip computer display.
Setting the vehicle load
Tyres
Check
Low Load
High Load
E74434
Correct tyre pressure settings
depend on vehicle load. See
Technical specifications (page
238). The system can only detect low
pressure if you have entered the
current vehicle load.
1. Press the right arrow button on
the steering wheel to enter the
main menu.
2. Highlight Setup with the up and
down buttons and press the right
arrow button.