Ford Mondeo Owner's Handbook Manual page 119

• The functions Program 1 and
Program 2 allow you to
programme up to two heating
cycles for each day of the week.
These times will remain stored
and the heater will warm up the
vehicle at these times on these
days every week.
• The function One-Time allows
you to programme one heating
cycle for one specific day.
• The function Active now
automatically switches on the
heater.
Programming the functions
Program 1 and Program 2
Program 1
[07:55]
Monday
Tuesday
Wednesday
Thursday
Friday
E74468
1. Highlight Program 1 and press
the right arrow button.
2. Highlight the day on which the
heater should warm up the
vehicle.
3. Press the OK button to confirm
the selection. A cross appears in
the box next to the day to show
that this day is selected.
Climate control
4. Continue in the same way to
5. To set the time at which the
6. Press the OK button and the
7. When you have finished, press the
E74469
You can use the function Program
2 to set a second cycle, for example
different times on different days or
twice on the same day. The
programming procedure is the same
as for the function Program 1.
117
select all the days on which the
heater should warm up the
vehicle.
vehicle should be warmed up,
highlight the time at the top of the
display and press the right arrow
button.
hours flash. Use the up and down
arrow buttons to adjust the
individual settings and the left and
right arrow buttons to move to the
next or previous setting.
OK button again to confirm the
selection.
Parkheater
Program 1
07:55
01:12:2006
OK = change