Configuration; Configuring Ports - D-Link DES-6500 User Manual

D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch
Section 4

Configuration

Configuring Ports

Configuring Port Mirroring
Configuring Link Aggregation
Configuring IGMP
Configuring The Spanning Tree
Configuring Forwarding and Filtering
Configuring VLANs
Configuring Traffic Control
Configuring Port Security
Configuring QoS
The System Log Server
Configuring SNTP Settings
Configuring The Access Profile Table
Configuring The Port Access Entity
Configuring Layer 3 IP Networking
Configuring Ports
This section contains information for configuring various attributes and properties for
individual physical ports, including port speed and flow control. Clicking on Port
Configurations in the Configuration menu will display the following window for the user.
The Unit pull-down menu refers to the module installed in the DES-6500 chassis that you
want to configure ports for. The modules are numbered from 1 at the top (just below the
DES-6502 CPU module) to 8 at the bottom (the slot farthest from the CPU module).
24