Note On Model Differences; Choosing A Good Location - Primera Bravo 4100 Series User Manual

TOC
A. NOTE ON MODEL DIFFERENCES
The Bravo 4100-Series comes in seven different models including:
• Bravo 4051 (1 DVD Drive) Burns and Prints CD, DVDs and
DVD-DL, 50 disc capacity, No Kiosk.
• Bravo 4051 BLU (1 BDR Drive) Burns and Prints CD, DVD,
DVD-DL, BDR and BDR-DL, 50 disc capacity, No Kiosk.
• Bravo 4100 AutoPrinter (No Drives) Print Only, 100 Disc
Capacity with Kiosk - See Section 3A, C and D.
• Bravo 4101 (1 DVD Drive) Burns and Prints CD, DVDs and
DVD-DL, 100 Disc Capacity with Kiosk.
• Bravo 4102 (2 DVD Drives) Burns and Prints CD, DVDs
and DVD-DL, 100 Disc Capacity with Kiosk.
Bravo 4101 Blu (1 BDR Drive) Burns and Prints CD, DVD,
•
DVD-DL, BDR and BDR-DL, 100 Disc Capacity with Kiosk.
• Bravo 4102 Blu (2 BDR Drives)Burns and Prints CD, DVD,
DVD-DL, BDR and BDR-DL, 100 Disc Capacity with Kiosk.
These instructions are written to apply to all models. For
example there are no special instructions for burning Blu-ray
Discs
TM
recognizes that you have Blu-ray capable drives and adds
the BDR media type
Important Note: The Bravo 4101 Blu or Bravo 4102 Blu requires the
Disc Publisher to be connected to the computer USB for printing
AND eSATA cable(s) for the drives. Both eSATA and USB are
required! The eSATA PCI express card included with the unit may
need to be installed if you do not already have eSATA ports on your
computer. Refer to the instructions included with the card for more
details.
B. CHOOSING A GOOD LOCATION
• Place the Publisher in a location with adequate air
circulation to prevent internal heat build up. You will
need at least 24" (61 cm) of overhead space to allow the
top cover to open freely.
• Do not place the Publisher near heat sources such as
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
2 Getting Started
if you have a Blu-ray
to the list of available media to burn.
model. The software simply
INDEX