B3. Robot Options - Primera Bravo 4100 Series User Manual

TOC
This operation may be useful to verify software installation
discs where it is extremely important to have accurate
copies of all installation files. Checking this option will
double the time it takes to record each disc.
• Set Time and Date to Mastering
checked, all files on the disc will automatically be set to the
current time and date.
B.3 Robot Options/Bin Selection
Double click on the bin icons at the bottom of the screen to
access these settings.
Here you can designate the type of media in the left and right
bins and finished bin location.
Kiosk Mode (Not available with 4051 models). By default,
PTPublisher assumes that discs are loaded into only the right
bin. It picks from the right bin and places completed discs in
the left bin. Check Kiosk Mode to make the robot pick blank
media from both the right and left bins. Finished media will be
placed in Kiosk bin. Kiosk Mode still requires the same type of
media in both the right and left bins. See Section 2D for
instructions on setting up the Kiosk bin.
Bin Selection
Selection to use different types of media in the left and right
bins. Check the box and set the media type to one of the avail-
able options. Once Bin Selection is enabled the contents of the
bin will be reflected next to the bin icons. To take advantage of
this feature choose a specific type of media on step one of the
data project. Other project types will automatically select the
correct type of media. When you queue multiple projects with
different media types the robot will now choose from the left
or right bin depending on what media type is selected in the
project and set for the bin. All finished discs will be placed in
the kiosk bin.
Note: PTPublisher has no way to verify if the actual discs loaded into the
bin are CDs, DVDs, DVD-DL or BDR. It is up to the user to make
sure the designated media is in the correct bin.
Creating Discs
22
(Not available with 4051 models). Enable Bin
Time. If this option is
INDEX