Repositioning The Motion Detection Area - Casio Exilim EX-ZR850 User Manual

NOTE
• In the case of snapshot shooting, the camera will return to standby after an image
is shot. The camera will automatically exit standby after 30 snapshots are shot
using the Motion Shutter.
• Pressing the shutter button will automatically exit standby.
• The Motion Shutter may not operate properly when there is little difference
between the subject and the background of the icon, or when the subject is located
far away from the camera.
• "O Tracking" cannot be selected for the AF area setting while shooting with the
Motion Shutter. If "O Tracking" is selected in another mode, selecting the Motion
Shutter will cause the AF area setting to change to "U Spot".
• You cannot shoot a snapshot by pressing the shutter button while movie recording
is in progress (Snapshot In Movie).
Repositioning the Motion Detection Area (Motion Position)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab *
Motion Position
Use the procedure below to reposition the
while shooting with the Motion Shutter.
1.
Use [8], [2], [4], and [6] to reposition the currently selected icon.
2.
When the icon is located where you want, press [SET].
(Start self-timer) icon that will appear
99
Advanced Settings (REC MENU)