Table of Contents
Advertisement
IMPORTANT!
• The Movie Quality is always STD (640
• "O Tracking" cannot be selected for the AF area setting while shooting with
Remote Capture. If "O Tracking" is selected in another mode, selecting Remote
Capture will cause the AF area setting to change to "U Spot".
• The Motion Shutter cannot be used while shooting with this function.
• High Speed CS and Prerecord CS can be used in any recording mode other than
Premium Auto Pro. Configure CS Speed, Maximum CS Shots, and Pre-record CS
Shots settings on the camera before establishing a wireless LAN connection.
• In the case of Prerecord CS, tapping the "PAST" button at the bottom of the
smartphones screen will start continual pre-recording of images to a temporary
buffer. After that, tapping the shutter button
of images specified by "Maximum CS Shots" (pre-recorded images plus real-time
recorded images).
• When the focus mode setting (page 44) is "AF" (Auto Focus) or "Macro",
continuous AF (page 111) is enabled during Remote Capture and focus is
performed in the center of image.
. Controlling Your Camera with a Smartphone
EXILIM Remote supports the Remote Capture operations listed below. This manual
explains EXILIM Remote operations based on screens that appear using the iPhone
version. Some operations may differ depending on your smartphone type.
1
bl
bk
9
8
480) when shooting with Remote Capture.
x
Exits Remote Capture.
1
Shows the current recording mode.
2
2
Displays current flash settings.
3
Tap to change flash settings.
3
Displays what is being picked up by the camera's
4
4
lens.
Performs a zoom operation.
5
Starts Prerecord CS shooting.
5
6
This button is displayed when the camera is in the
6
High Speed CS Mode and the "Pre-record CS
7
Shots" setting is anything other than 0.
Toggles between snapshot and movie shooting.
7
Shoot a snapshot or start movie recording.
8
Sends the snapshot that was just recorded to the
9
smartphone.
Displays location information settings.
bk
Displays current self-timer settings.
bl
Tap to change self-timer settings.
149
(see below) will record the number
8
Establishing a Wireless LAN Connection
Advertisement
Table of Contents
