Using The Control Panel - Casio Exilim EX-ZR850 User Manual

Using the Control Panel

The Control Panel can be used to configure camera
settings.
1.
In the REC mode, press [SET].
• You can also display the Control Panel by
pressing [2].
2.
Use [8] and [2] to select the setting you want to change, and then
press [SET].
This will select one of the Control Panel icons and display its settings.*
Self-timer (page 41)
1
White balance (page 42)
2
Focus (page 44)
3
ISO sensitivity (page 46)
4
Make-up Level (page 47)
5
EV shift (page 48)
6
Flash (page 49)
7
Metering (page 51)
8
*
Items displayed in the Control Panel depend on the recording mode.
3.
Use [8] and [2] to change the setting.
4.
After the setting is the way you want, press
[SET].
This will apply the setting and return to the REC
mode.
NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 96).
1
2
3
4
5
6
7
8
40
[8] [2] [4] [6]
[SET]
Control Panel
Snapshot Tutorial