Configuring Handsfree Mode Settings; Repositioning The Motion Detection Area - Casio EXILIM EX-FC300S User Manual

Configuring Handsfree Mode Settings (Handsfree)
Use the procedure below to configure Handsfree Mode settings.
1.
In the REC mode, press [MENU].
2.
Press [4], use [8] and [2] to select the " r REC MENU" tab, and then
press [6].
3.
Use [8] and [2] to select "Handsfree" and then press [SET].
4.
Configure Handsfree settings.
Setting
Motion Shutter
Timer
Repositioning the Motion Detection Area (Motion Position)
Use the procedure below to reposition the motion detection area
icon) as required when it (or the preview icon
image.
1.
In the REC mode, press [MENU].
2.
Press [4], use [8] and [2] to select the
" r REC MENU" tab, and then press [6].
3.
Use [8] and [2] to select "Motion Position"
and then press [SET].
4.
Press [RING].
• This will select one of the two icons on the
display. Pressing [RING] toggles the selection
between the start self-timer icon and the preview icon.
Description
Specifies the camera operation that enters the Handsfree
Mode.
Always:
The camera always remains in the Handsfree Mode,
regardless of whether or not the monitor screen is tilted.
180°only:
The camera enters the Handsfree Mode only when the
monitor screen is tilted upwards 180 degrees.
Off: Handsfree Mode disabled
Specifies the amount of time that should elapse until
shooting starts after the camera detects movement.
Settings: 0.5 sec, 1 sec, 2 sec, 10 sec
64
) hinders your view of the display
Start self-timer icon
Preview icon
(Start self-timer
Snapshot Tutorial