Network Menu - Brother DCP-J100 User Manual

Network menu (DCP-J105)
Level1 Level2
3.Network 1.TCP/IP
2.WLAN Assistant —
3.Setup Wizard —
See Software and Network User's Guide.
The default settings are shown in Bold with an asterisk.
62
Level3 Options
1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
[000-255].
2.IP Address
[000-255].
[000-255].
[000-255]
[000-255].
3.Subnet Mask
[000-255].
[000-255].
[000-255]
[000-255].
4.Gateway
[000-255].
[000-255].
[000-255]
5.Node Name BRWXXXXXXXXXXXX
6.WINS Config Auto*
Static
7.WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
9.APIPA On*
Off
—
—
Descriptions Page
Chooses the BOOT
See
method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway
address.
Lets you check the Node
name.
Chooses the WINS
configuration mode.
Specifies the IP address
of the primary or
secondary WINS server.
Specifies the IP address
of the primary or
secondary DNS server.
Automatically allocates
the IP address from the
link-local address range.
You can configure your
wireless network settings
using the Brother
CD-ROM.
You can manually
configure your print
server for a wireless
network.
C
.